The Outboard Price Almanac · Used outboards
Evinrude E-TEC outboard, used
There are not yet enough recent completed sales of a used Evinrude E-TEC outboard to publish a price (we need at least 5 in the last 90 days).
Used Evinrude E-TEC outboards. BRP stopped making Evinrude outboards in 2020.
Not enough sales yetWe publish a price once there are 5 clean sales in the window. Outboard prices swing with hours, shaft length and condition, so compare carefully.
See used listings on eBay- Brand
- Evinrude (BRP)
- Horsepower
- various
- Engine
- Direct-injection 2-stroke
Worth knowing
BRP ended production of Evinrude outboards in 2020. Dealers still service many E-TECs, but parts and dealer support thin out every year, which is reflected in used prices. Price in the cost of future parts before buying one.
Before you buy a used outboard
- Get the engine hours from the gauge or, better, a dealer's diagnostic report, which also shows how many of those hours were at full throttle.
- Ask for a compression test on every cylinder. Readings should be close to each other; one low cylinder is a warning.
- Check the shaft length (20 or 25 inch on most mid-size motors) and the rotation against your boat.
- Ask whether it ran in salt or fresh water, and look for corrosion around the cowling seams and the lower unit.
- Pull the gear-oil drain screw or ask the seller to: milky oil means water is getting past the seals.
- Ask what comes with it: controls, harness, gauges, prop. Rigging a motor with no controls can cost as much as a lower unit.